| Process technology | |
| Power consumption approx. (W) | 125 |
| Production output approx. (g/Cl2/h) | 16 |
| Product pH level approx. (pH) | pH7 |
| Product concentration approx. (g/Cl2/h) | depending on system output |
| System output | 20 - 100% (controlled) |
| Max. daily output [g/d] | 384 |
| Salt consumption approx. ([g/NaCl/h) | 38 (at 100% system output) |
| Salt is carried over into product | none |
| Supply voltage (V/Hz) | 230V/50Hz |
| Fuse right/left (A) | 6.3A / 0.400 |
| Transport weight (kg) | approx. 33 |
| Space requirements wall mounting plate (mm) | (h x w x d) 1030 x 900 x 250 |
| Space required for installation (mm) | ca. 500 x 1300 |
| Product reserve (l) | Production in line with demand |
| Softening plant | Reverse osmosis (integrated on mounting plate) |
| Power module | integrated on mounting plate |
| Operating conditions | |
| Connected load | 0.3 kVA, 1 x 230V/50Hz |
| Process water | Water quality according to the European Drinking Water Ordinance |
| Drinking water connection | 1/2“ |
| Min./max. room temperature (°C) | 10 - 32 |
| Process water inlet temperature (°C) | 10 - 27 |
| Process water initial pressure (bar) | 2.5 - 3 |
| System pressure after pressure reducer | approx. 2 bar |
| Hydrogen discharge | min. d25 continuously rising to the outside |
| Ventilation of installation room | Air exchange rate min. 2m³/h per m³ room volume (recommended) |
| Storage temperatures (°C) | 5 - 40 |
| Max. humidity (%) | 90%, non-condensing |
| Separate technical room | No |
| Interfaces | Wi-Fi / dinoAccess |
| Recommended resources | dinosolit salt quality (approved according to the EC Directive on Biocides) |
| Drain | min. DN40 |
| All information subject to error and technical change. | |
Sprache / Language
Select your language
Deutsch (DE) 
English (UK)