Microprocessor-controlled measuring and control device, optionally for redox / pH or Poolcare (time-controlled) / pH, in splash-proof plastic housing, wired ready for connection 230V/50Hz. Display of measuring values on backlit graphical display with alphanumeric characters. Menu navigation via clear text display with selection of the desired language. Operating status, warning and alarm messages in clear text via the status bar on the display.

Compact measuring and control device for the measuring options:

• ORP, pH, temperature and sample water deficiency
• Poolcare (time-controlled), pH, temperature and sample water deficiency

Free switching between measurement options.

By adding the "potentiostatic measuring board for the Poolcontrol DYNAMICS", it is possible to implement additional measuring options.

Characteristics of system unit in wall-mounted case for disinfection and dosing equipment:

• Microprocessor-controlled measuring and control device
• IP 65
• Clear graphics display
• Logical menu structure for an easy adjustment of setpoints, limit values and parameters
• Configuration menu for selection of measurement technology and other functions
• Password protection to prevent unauthorized operation
• Multilingual system / language selection
• Measuring input for measurement of ORP
• Measuring input for measurement of pH
• Measuring input temperature measurement
• Integrated standard controls for disinfection, pH correction
• pH reduce and pH raise can be connected simultaneously
• Control of pH raise or flocculant dosing optional
• Automatic switch-on delay
• Sample water monitoring
• Dosing time monitoring
• Empty warning contact for container fill level
• Integrated alarm relay
• Interfaces for connection to dinowin and dinotecNET+
• Analog output for output of hygiene parameters

Compact measuring cell universal fm 5/3 for 3 probes incl. flow measurement/restriction for sample water return or free drain.

Pressure-resistant compact measuring cell made of PP for a potentiostatic probe (such as Cl2, ClO2, O3 or Poolcare), a pH and a redox probe.
Integrated turbine for recording the sample water flow and for a flow compensation of the potentiostatic measurement. The maximum flow is limited by means of a flow restrictor.
The counter electrode required for potentiostatic measurement is pre-assembled in the compact measuring cell. A sampling valve is integrated in the measuring cup which can be easily unscrewed. The compact measurement cell can be operated under pressure or depressurized.

Note: Can be used for water with a chloride concentration of less than 500mg/l

The fiber filter is used to retain impurities in the sample water to prevent entry in the measuring cell.

Fiber filter with transparent filter cup and cleanable strainer, small mesh size, standardized connections for installation in front of a measuring cell.

Measuring accessories for measurement of the parameters chlorine and pH.
This includes:

• 1x potentiostatic probe for free chlorine
• 1x pH measuring probe
• 1 x cleaning material liquid
• 1 x special cleaning paste
• 1 x calibration solution pH 4.0/50 ml
• 1 x calibration solution pH 7.0/50 ml

Microprocessor-controlled peristaltic dosing pump for an automatic addition of any kind of liquid media, even smallest quantities.

With stepper motor and continuously variable digital speed control. Activation by the touch of a button or control via switching contact (ON/OFF), current and frequency control.
The delivery rate is infinitely variable via the control or two potentiometers on the pump.
With integrated dosing pump hose and hose connector.
Canister low level signal input and fault output are included, a hose rupture is detected automatically. The pump is safe for continuous operation and features a thermal protection.

It can be easily ventilated by the touch of a button and can dose at 100 percent capacity for a minute by pressing a button.
Operating conditions are signalled via LEDs.