0110-643-90

Short description

Budget-priced and convenient measurement and control of the water quality. A properly controlled pH value and disinfectant content allow effective and efficient water care. They protect the technical equipment of the swimming pool from corrosion. An automatic dosing of water care agents ensures an optimum hygienic safety.

Description

Microprocessor-controlled compact measuring and control system for pH and disinfection (chlorine). With self-illuminating numeric display.

A dosing of water care agents based on requirements (and dependent on the redox potential) ensures an optimum hygienic safety. The wear-free redox electrode does not need any calibration (maintenance-free). The CF Control 100 can use chlorine for disinfection. Appropriate external pumps are used for dosing.

CF control 100 with integrated filter control and temperature control via heating or solar.

Equipment:

Digital display
Automatic switch-on delay 0 - 30 min
Sample water monitoring
Dosing time monitoring
Service display for redox probe test
Service display for error pH measuring input
Set point query
Display of slope
Input values
Control of filter run times
Temperature control, optionally via solar or heating circuit

pH measurement:

combination electrode with KCL filling
Control range 6.5-8.5 pH

Redox measurement:

Measured value recording 0-1000mV:
Rx glass electrode
Wear-free

Temperature measurement:

Temperature sensor Water required (optional)
Solar: temperature sensor Solar required (optional)

Model with 2 peristaltic dosing pumps dinodos EASY, approx. 3.0 l/h, max. pressure 1.5 bar, pump hose kit incl. hose connector 6/4 mm.

Included:

Flow valve
Measuring cable
Suction lines
Dosing lines
Injection valves
Sample water line
Calibration solutions pH7 and pH 4
Fibre filter
Sample water kit and operating instructions

Technical data

Mains voltage:	100 - 240 V +6%/-10%, 50/60 Hz
Power consumption:	10 VA
Protection class:	IP 65
Dimensions housing (wxhxd):	approx. 215 x 185 x 100 mm
Weight:	approx. 1.8 kg
Dimensions wall mounting plate (wxhxd):	600 x 360 x 8 mm
Permissible ambient temperature:	0 to 50 °C
Permissible storage temperature:	-20 °C to + 65 °C
Permissible humidity %:	max. 90% at 40°C (non-condensing)
Storage temperature pH electrode:	-5 °C to + 40 °C
Switch-on delay:	20 minutes (adjustable: 0 - 30 minutes)
Controller:	pulse length proportional (adjustable 10-100%)
Operation:	with plastic foil keypad
Display:	numeric, 2 displays with 3 digits each self-illuminating Function LED
Redox measuring and control part
Rx measurement:	Rx glass electrode Wear-free Display "Redox mV"
Continuous dosing control:	60 minutes (adjustable: 0 - 99 minutes)
Default set point:	600 mV
P-band:	100 mV
Minimum switch-on pulse:	1 sec.
Pulse interval time:	10 - 100 sec. (adjustable)
Limit value upper:	900 mV
Limit value lower:	300 mV
pH measuring and control part
pH measurement:	via combination electrode with KCL filling
Measuring range:	2 - 9.99pH
Resolution:	0.01 pH
Default set point:	7.2 pH
P-band:	0.5 pH
Minimum switch-on pulse:	1 sec.
Pulse interval time:	10 - 100 sec. (adjustable)
pH control direction:	pH raise/pH reduce 2 relay adjustable
Continuous dosing control:	60 minutes (adjustable 0 - 90 minutes)
Slope:	58 mV/pH
Zero point of electrode:	7.0 pH
Compensation temperature:	28°C
Slope monitoring:	>65 mV ---- <50 mV
Control range:	3 - 12 pH
Limit value upper:	8.0 pH
Limit value lower:	6.0 pH
Calibration:	manual with calibration solutions pH 7.0 + pH 4.0
Electrode check:	by means of a compensation of slope and zero shift, control of slope and zero point
sample water monitoring:	via Reed contact sensor
Filter control
Switching times	4 switching points, 2 runt times possible
Filtration pump:	Relay circuit for filter pump 230V / 0.5 kW (max)
Temperature control
Temperature sensor:	PT 1000 (optional)
Solar sensor:	PT 1000 (optional)
Alarm
Alarm activation:	water deficiency and dosing alarm Deactivation of dosing

dinodos EASY

Mains voltage:	230V +/-10 %, 50/60Hz
Power consumption:	approx. 5 VA max.
Protection class:	IP 65
Dimensions housing (w x h x d):	approx. 135 x 65 x 85 mm
Weight:	approx. 0.6 kg
Permissible ambient temperature:	+10 to +50 ^oC
Drive:	Gear motor
Pump hose:	compl. with connection pieces for suction line D4
Capacity max.:	approx. 0.25-4.5 l/h (infinitely variable), at a counterpressure of max. 1.5 bar
Suction lift max.:	1.80 m
Operation:	Capacity adjustable via potentiometer