Short description
Budget-priced and convenient measurement and control of the water quality. A properly controlled pH value and disinfectant content allow effective and efficient water care. They protect the technical equipment of the swimming pool from corrosion. An automatic dosing of water care agents ensures an optimum hygienic safety.
Description
Microprocessor-controlled compact measuring and control system for pH and disinfection (chlorine). With self-illuminating numeric display. A dosing of water care agents based on requirements (and dependent on the redox potential) ensures an optimum hygienic safety. The wear-free redox electrode does not need any calibration (maintenance-free). The CF Control 100 can use chlorine for disinfection. Appropriate external pumps are used for dosing. The system is equipped with 2 dosing pumps for pH (lower and raise) and 1 dosing pump for disinfection. Equipment: pH measurement: Redox measurement: Model with 3 peristaltic dosing pumps dinodos EASY, approx. 3.0 l/h, max. pressure 1.5 bar, pump hose kit incl. hose connector 6/4 mm. Included:
Technical data
Mains voltage:
100 - 240 V +6%/-10%, 50/60 Hz
Power consumption:
10 VA
Protection class:
IP 65
Dimensions housing (wxhxd):
approx. 215 x 185 x 100 mm
Weight:
approx. 1.8 kg
Dimensions wall mounting plate (wxhxd):
600 x 360 x 8 mm
Permissible ambient temperature:
0 to 50 °C
Permissible storage temperature:
-20 °C to + 65 °C
Permissible humidity %:
max. 90% at 40°C (non-condensing)
Storage temperature pH electrode:
-5 °C to + 40 °C
Switch-on delay:
20 minutes (adjustable: 0 - 30 minutes)
Controller:
pulse length proportional (adjustable 10-100%)
Operation:
with plastic foil keypad
Display:
Redox measuring and control part
Rx measurement:
Continuous dosing control:
60 minutes (adjustable: 0 - 99 minutes)
Default set point:
600 mV
P-band:
100 mV
Minimum switch-on pulse:
1 sec.
Pulse interval time:
10 - 100 sec. (adjustable)
Limit value upper:
900 mV
Limit value lower:
300 mV
pH measuring and control part
pH measurement:
via combination electrode with KCL filling
Measuring range:
2 - 9.99pH
Resolution:
0.01 pH
Default set point:
7.2 pH
P-band:
0.5 pH
Minimum switch-on pulse:
1 sec.
Pulse interval time:
10 - 100 sec. (adjustable)
pH control direction:
Hysteresis pH:
0 - 1 pH (adjustable in steps of 0.1 pH)
Continuous dosing control:
60 minutes (adjustable 0 - 90 minutes)
Slope:
58 mV/pH
Zero point of electrode:
7.0 pH
Compensation temperature:
28°C
Slope monitoring:
>65 mV ---- <50 mV
Control range:
3 - 12 pH
Limit value upper:
8.0 pH
Limit value lower:
6.0 pH
Calibration:
manual with calibration solutions pH 7.0 + pH 4.0
Electrode check:
by means of a compensation of slope and zero shift, control of slope and zero point
sample water monitoring:
via Reed contact sensor
Alarm
Alarm activation:
water deficiency and dosing alarm
Deactivation of dosing
dinodos EASY
Mains voltage:
230V +/-10 %, 50/60Hz
Power consumption:
approx. 5 VA max.
Protection class:
IP 65
Dimensions housing (w x h x d):
approx. 135 x 65 x 85 mm
Weight:
approx. 0.6 kg
Permissible ambient temperature:
+10 to +50 oC
Drive:
Gear motor
Pump hose:
compl. with connection pieces for suction line D4
Capacity max.:
approx. 0.25-4.5 l/h (infinitely variable), at a counterpressure of max. 1.5 bar
Suction lift max.:
1.80 m
Operation:
Capacity adjustable via potentiometer
Application
Outdoor pool/Indoor pool
for pools with a water volume up to 150 m²
Accessories
Fiber filter with transparent filter housinFiber filter with transparent pre-filter casing
cleanable strainer, mesh size 0.5 mm
8/6mm, max. 2.5 bar, max. 50°C, material: PVC, black
May also be of interest
Chemoform control 100 Chlorine (Rx glass electrode/pH)
with filter control, dosing capacity 3 l/h
pre-assembled on wall mounting plate
Chemoform Control 100 CHLORINE-FREE/pH
with filter control and wg dosing, dosing capacity 3 l/h,
pre-assembled on wall mounting plate
Deutsch (DE) 
English (UK)