Short description
Container Level Module CLM2 for hydrostatic level measurement of liquids in unpressurised containers. (e.g. canisters with water treatment agent). The module has two separate measuring inputs, as well as inputs for two optional limit contacts. (e.g. leak detection). All connections are plug-in, allowing the module to be quickly mounted and replaced.
Description
Container Level Module CLM2 for hydrostatic level measurement of liquids in unpressurised tanks. The module features two separate measuring inputs, as well as inputs for two optional limit contacts. Three diagnostic LEDs indicate the correct operating voltage as well as the reception and transmission of bus data. The module is suitable for mounting on 35 mm DIN rails and is supplied with a 4-pin plug-in terminal. The software integration of the module is carried out via the dinotec NET+ system.
Technical data
Function
Electrical characteristics
dinotec NET+ system bus
RJ12 socket (6-6)
Power supply (bus)
20V- 30V DC (nominal 24V)
Maximum power consumption
3.0W
Standard device address CLM2
10 (on delivery)
Status display
Pressure P0
Pressure measurement input
Pressure P1
Pressure measurement input
Digital input 0
Input for volt-free switching contact
Digital input 1
Input for volt-free switching contact
Input
Function
Channel 0
Bit address 0
LED
Input for volt-free switching contact
On
ON status contact < 100R
Off
Status OFF
1 - Air hose Di = 2.4 mm
2 - Float switch connection cable
3 - Level in the tank
4 - Float switch for leak detection
Mechanical characteristics NET+ modules
Conductor cross-section connection terminals
0.25 - 2.5 mm²
Tightening torque of the clamping screws
0.5 Nm max.
Enclosure for DIN rail mounting
(Standard EN50022 profile 35mm x 7,5mm)Plastic 40x155x70 mm³ W/D/H
Ambient temperature
0 to 50° C
Protection rating
IP 20
Weight
0.250 kg
Mechanical characteristics CLM2
Hose connection (DI)
2/4mm
Maximum hose length
10m
Application
Detection of level states (level 0 - 120cm) in unpressurised open containers.
Monitoring of level switches.
Supplementary information
This module is a component of the dinotecNET+ pool and spa management system. Ask your specialist dealer about additional modules and field devices for a wide range of applications.
Accessories
dinodos START
Peristaltic dosing pump in wall-mounted housing
with mains cable L = 1.8 m grey, hose connection 6/4 mm
Deutsch (DE) 
English (UK)